Others do have the same issue.
I’m not concerned about other devices - just this one. Comparing rocks to boulders - na.
It’s very simple. The keypad is extremely overly sensitive. If there is no way to adjust, I’l hook the L5 up to the tower, and use, similar to lapdock only using a better keyboard, and monitor, then I save a lot time changing each app so it fits on the screen without the need to be scrolling back and forth to get what is off-screen, IF, the device puts a scroll bar, most times not.
My Hoyoki arrived, to run phone through desktop.
Overly sensitive areas on keytab causes search box to appear with a cursor in it. Why? I didn’t press anything for that. Getting the cursor out of the search box is done by out of the search box is only by reboot, if one swipes/taps anything, and it stubbornly does nothing 2, 3 6 9 times, and finally does,the search box underneaths existing view shows up with cursor inside it. Only way to get cursor out is reboot.
The keytab is sensitive, when the pad is being read by the system. Something must be interfering, and blocking things while whatever takes over id done. That might be 2,3 4, 6 seconds.
Suggestions:
1 - create a means to edit the time between taps.
2 - Set a means with which to get the cursor out of the search box without having to do a cold start.
3 - whatever interrupts key-presses, permit L5 users to enable/disable it. If nothing is interrupting (I think there is), please recommend a good compatible anti-malware and virus detector.
4 - failing that, I’d rather spend the time of reinstalling OS than trying to remember what needs tweaked that works and stop what doesn’t.
What is Best Practice procedure to wipe it clean and start over OS again? I didn’t see any in https://docs.puri.sm/Librem_5.html
TIA