My quest to eliminate passwords

[Ick]

I really think we should get some options too choose. We have different needs and could create our own solutions based on options in Mobile Settings app.

Some want no password. Some want no LUK, so increasing delay would be nice. I personally want to shut down device after few attempts to protect L5 via stronger encryption password (to make sure lost devices even prevent from professional hacking).

For even more advantages in future things like guest PINs would be cool. Giving family the ability to get access, without rights to enter everything on device (no sudo, no read and/or write access to specific folders if wanted etc).
Or alternative forms of login (graphical etc).

At the end Login is something every phone user has to do a lot while using those devices. So it’s something that definitely should give best user experience on each personal preferences. Not everything in current stage of PureOS/Phosh, but some day in future when all more important things got implemented.

[adamd]

@Ick

I personally want to shut down device after few attempts to protect L5 via stronger encryption password (to make sure lost devices even prevent from professional hacking).

This would be great. How can we monitor via a script for failed attempts to enter the pin code?

[amosbatto]

@irvinewade

Apple’s iOS, for instance, makes the user wait increasing lengths of time after each incorrect PIN guess.

It is arguable that the Librem 5 should offer the same (but that’s really an upstream problem).

Yes, PAM should provide that option in Linux. Most Linux devices don’t have this problem, since their passwords use a full character set and are a variable length, so the number of combinations becomes almost infinite, so this is a case where mobile Linux devices that use PINs are introducing a new problem for Linux.

In contrast, Linux has long had to worry about brute force login attempts through ssh, which is why it is configured by default to allow a maximum of 6 failed login attempts before it blocks further attempts from a particular IP address. On my servers, I can see the botnets trying to do brute force logins. I am getting about 3000 login attempts per day on one of my servers, so I do my best to use as tight of security as possible there.

@irvinewade

Note though that if you don’t use LUKS then your 4 digit PIN can be broken in a fraction of a second (offline) and no amount of defence within the system itself will make any difference.

The issue for me is that the probability of locking myself out of my device is higher than the probability that my device will be stolen. For example, I just screwed up the L5 trying to figure out how to boot with Phosh unlocked. I was able to fix the problem, by booting with jump drive and fixing the file, which I wouldn’t have been able to do with an encrypted drive. I have lost files on my PC, because my drive was encrypted and I wasn’t able to boot my PC. For a normal person, who never plays around with the configuration files, it may not be a problem, but I’m far from normal.

[Ick]

@amosbatto

I have lost files on my PC, because my drive was encrypted and I wasn’t able to boot my PC. For a normal person, who never plays around with the configuration files, it may not be a problem, but I’m far from normal.

As long as you can type in LUKS you can repair it from another PC. I also screwed up login screen (had black screen) and could fix this. But even if the issue is worse: creating backups on SD-card before playing with such configurations can save the day. In worst case you would reinstall OS and load all backups back to system.

[amosbatto]

@adamd

This would be great. How can we monitor via a script for failed attempts to enter the pin code?

sudo lastb will show you a list of the failed login attempts (that are stored in the /var/log/btmp file) and sudo last will show you a list of the successful logins (that are stored in the /var/log/wtmp file). You can also do something like this:

sudo grep -i -E "(authentication failure|FAILED SU|Failed password)" /var/log/auth.log | grep -v "grep"

[j_s]

@amosbatto

Given that PAM sets a 3 second delay between login attempts, it is going to take a phone PIN punching robot 8.3 hours to try all 10,000 combinations in a 4 digit PIN, whereas it will be 833.3 hours to try all 1,000,000 combinations in a 6 digit PIN

Jost noting that statistically the expected number of attempts required to crack is half the number of possibilities (under possibly oversimplified assumptions).

[j_s]

@irvinewade

Note though that if you don’t use LUKS then your 4 digit PIN can be broken in a fraction of a second (offline) and no amount of defence within the system itself will make any difference.

And a mere 100 fractions of a second for 6 digits, but for some attacks, 6 vs 4 might still be worthwhile.

[irvinewade]

@amosbatto

by booting with jump drive and fixing the file, which I wouldn’t have been able to do with an encrypted drive

As @Ick already has, I would question that statement. LUKS is standard Linux and there is no inherent reason why you can’t unlock an encrypted partition on a desktop/laptop where the partition was set up on your Librem 5 - or any other combination.

I’m not saying you are certainly wrong - maybe there is some esoteric or niche aspect to your environment - just that in principle you can successfully move LUKS encrypted partitions from one Linux computer to another.

Of course if you forget your unlock passphrase (and you didn’t back up the master encryption key, or take other similar contingency actions) then you will be stuffed everywhere.

I will also endorse the idea of imaging the eMMC drive. It doesn’t matter how badly you stuff up the contents, if you create an image (which you can easily do with Jumpdrive) then you can restore an image (again using Jumpdrive). Because that operates below the level of encryption, there isn’t even any need for these operations to know that the contents are encrypted or to be able to decrypt the contents.

Yes, that is a relatively slow way to fix things up if you just buggered up one text file (config file, shell script, …) but if you are not even sure what you broke, it’s a good way to fix things.

If you are determined not to encrypt your partition then it is possible that “cipher null” used with LUKS is a better option, as compared with using an unencrypted partition. That way you should be able to change your mind (in either direction) without having to reflash and set up your computer from scratch.

Of course in that case you are still trusting that a LUKS partition from your phone can be opened on your desktop/laptop and you know what they say: доверяй, но проверяй

[irvinewade]

PS In the early days before Purism had the automatic re-encrypt in the LUKS variant of the flash image, the recommended procedure was to

• download the LUKS variant of the flash image to your desktop/laptop
• re-encrypt on the desktop/laptop
• then flash the image onto your phone.

This by itself illustrates a high degree of compatibility between LUKS on desktop/laptop and LUKS on the Librem 5. This just wouldn’t work at all if they were not compatible.

[irvinewade]

@amosbatto

On my servers, I can see the botnets trying to do brute force logins. I am getting about 3000 login attempts per day on one of my servers

Are you using the default ssh port? I use a non-default port, not because it improves security (it is just security through obscurity) but because it cuts down on the noise and helps to make it more likely that a potential intrusion can be noticed and responded to.

I use -F with last and lastb. That is because my records do and can stretch back over several years. Perhaps with thousands of attempts each day that won’t make much difference in your situation.

[Sharon]

@amosbatto

Oh well, nothing is perfect, but now my Librem 5 is as insecure as I can make it!

I am not worried about what a hacker may find on my devices, I worry about them using my device for their illegal purposes. I am safe behind my many pass-worded accessories and devices. I’ve been very fortunate so far and I owe it all to my tinfoil hat.

There had been remote attempts in the past, and some were successful. Ergo my move to Linux. Like the “The Girl” in Anon said “It’s not that I have something to hide. I have nothing I want you to see.”
I’m one that would welcome a better system that protects access to my devices. This IS about me - right?

I will be using your very well written chronological approach of ‘How To’ take Shields off-line. I will use the pwr button and not have to enter pword part.

Thanks
~s

[nscomputing]

@amosbatto

In contrast, Linux has long had to worry about brute force login attempts through ssh, which is why it is configured by default to allow a maximum of 6 failed login attempts before it blocks further attempts from a particular IP address. On my servers, I can see the botnets trying to do brute force logins. I am getting about 3000 login attempts per day on one of my servers, so I do my best to use as tight of security as possible there.

My servers settings/configs:

• PasswordAuthentication no
• PermitRootLogin no
• ChallengeResponseAuthentication no
• PubkeyAuthentication yes

Additionally I am using fail2ban to ban IP after 2 failed attempts.

[ajlok]

I gave my new L5 very gentle 8 weeks to convince me as a daily driver… that being said, it’s now used as a weight to keep letters flying off my desk…

Your i hate being forced to enter passwords all the time in my case nailed the coffin for my L5. Compared with my other phones it was “really demanding” to be used.

On first hand it was a real brick in my trousers pockets. Often also a pretty hot one.

On second hand i always had to manually send it to suspend. Otherwise the battery would not have lasted long enough with everything except phone being deactivated. Being able to at least suspend it, was a very good compromise.

But, to suspend it again after say a received phonecall (by the hand usually i was told, that i’m badly understandable, my voice not clearly myselfs one), you had to enter all the besaid passwords. If i remember right, first disc decryption (sometimes the process did not move forward after that). Or was it phone-pwd and the sim-pwd (by the way the contacts on my sim were not recognized by the phone).

There were several small other bugs and annoyances. But i always told myself to be kind, tolerant, move on and wait to let things become better (btw the L5 might really be the only phone where that dream’s true…).

Around 8 weeks after 1st use i gave up having it with me all the time. The time waisted for every bloody simple phonecall no matter if calling or receiving was a nightmare. Always having to enter all those passwords (a process that quite often did not move on). The need to enter all those passwords again to send the phone to suspend. People - not always - telling me, im badly understandable. Entering passwords again…

I’m able to see the point of the L5. I understand and try to tolerate the shortcomings. But it was just unbearable in my special case - no matter how pro i tried to be (i’ll keep it). I bought an S20+ with display-error for some bucks, set up firewalls and the like and - unfortunately - life became easier after switching phones.

---

That story being told, @amosbatto i’m really with you on your first sentences. And i can really understand, why you came up with your solution. Thanks a lot for sharing it, mate.

[spacemanspiffy]

I am a little confused - it’s not normal to be getting asked for passwords when answering the phone or putting the phone into suspend manually.

Phone calls can be answered without unlocking the phone.
The phone can be suspended from the top swipe-down menu > Power button.

There is an option in Settings > Privacy > Screen Lock too that will let you extend the time until the phone locks, if you don’t want to unlock it so often.

[ajlok]

Ok - thanks for that info. That might become handy as follows:

1.) Calling somebody
You first need to unlock the phone to be able to dial. After finishing the call you’ve got to send phone into suspend (might already be automatic by updates - i still had to do it manually).

2.) Receiving a call
You accept the call. You finish it. Phone locks again. Now you’ve got to unlock it again to manually send it to suspend.

Those things might already be outdated as Purism updates features on a regular base. As mentioned the L5 might be one of only few or even the only phone becoming better over time…

[fralb5]

You can set the automatic suspend in the phone settings >> Power
But it’s still a work in progress, for example the phone will go automatically into full suspend even if you are listening to music

@ajlok

You first need to unlock the phone to be able to dial.

Like any other “smartphones”, no ? And seems to me it’s a good thing
I think something is in the pipe (if not already available) to be able to activate the emergency calls without unlocking the phone

[Sharon]

@irvinewade

The only exception to that is … if you communicate privately with someone and that privacy is compromised because your phone is compromised then you are letting the other party down.

That’s the part where I might say to someone …‘but your lack of security puts my device at risk - it’s a two way highway’. And it’s the reason I hope to set up a whitelisted phone # gets past the recycle bin.
~s

[veleno]

Hi, beautiful Community!!
Please let me recall this old thread because I’d like to implement Picture Password into Librem 5 but, because I’m not a programmer I asked help to ChatGPT and here what he said:

---

Overview

1. Graphical Interface: You’ll need to create a graphical interface that displays an image and allows users to touch specific points.

2. Password Management: You need to handle the input and verification of the user’s touch sequence.

3. System Integration: Your application will need to integrate with the PureOS authentication system.

Technologies and Tools

• Libraries: You’ll use libraries such as GTK+ for the graphical interface, as PureOS is based on GNOME, which uses GTK+.
• Programming Language: Python is a common choice for quickly developing GTK+ applications, but you could also use C or C++.

Example Code with Python and GTK+

1. Install Dependencies

Make sure you have python3, python3-gi, and libgtk-3-dev installed.

sudo apt-get install python3 python3-gi libgtk-3-dev

2. Basic Script

Here is a simple example to get you started with creating the graphical interface using GTK+ in Python:

import gi
gi.require_version('Gtk', '3.0')
from gi.repository import Gtk, Gdk

class PicturePassword(Gtk.Window):
    def __init__(self):
        Gtk.Window.__init__(self, title="Picture Password")

        self.image = Gtk.Image()
        self.image.set_from_file("path_to_your_image.png")  # Insert the path to your image

        self.drawing_area = Gtk.DrawingArea()
        self.drawing_area.set_size_request(400, 400)  # Set the size of the drawing area
        self.drawing_area.connect("button-press-event", self.on_click)
        
        box = Gtk.VBox()
        box.pack_start(self.image, True, True, 0)
        box.pack_start(self.drawing_area, True, True, 0)
        self.add(box)

        self.points = []  # To store the touched points

    def on_click(self, widget, event):
        x, y = event.x, event.y
        self.points.append((x, y))
        print(f"Point clicked: ({x}, {y})")  # Debug
        # Handle point verification here
    
    def run(self):
        self.connect("destroy", Gtk.main_quit)
        self.show_all()
        Gtk.main()

if __name__ == "__main__":
    app = PicturePassword()
    app.run()

3. Sequence Verification

Implement the logic to store and verify the touch sequence. You can do this by comparing the touched points with a predefined sequence.

Integration and Security

• Integration: Integrate the app with the PureOS authentication system. This may require creating a module or plugin for the existing login system.
• Security: Ensure your implementation is secure by thoroughly testing for potential vulnerabilities.

This example is quite basic and serves as a starting point. For a production application, you’ll need to add many more features, handle various scenarios, and ensure security. If you have specific questions or need more details on any part of the code, let me know!

---

Please what do you think? Is it enough to have PP in Librem 5? And if yes how can insert it into PureOS?
I’d like to give my micro contribution although I’m not programmer (I already financed it in “fund your app” section last year)!
Thank you

PS: please, is there a way to insert those kind of text into some kind of “block” section that allow, this post, to be more readable? I can’t find it!
Thank you

[FranklyFlawless]

@veleno

PS: please, is there a way to insert those kind of text into some kind of “block” section that allow, this post, to be more readable? I can’t find it!

Quotes:

@FranklyFlawless

You can use the > character to start a quote, or use this instead:

[quote]Insert quote here.[/quote]

Mention @discobot for learning about Discourse functions.

See also:

@FranklyFlawless

@discobot display help

[irvinewade]

@veleno

some kind of “block” section

Using the Markdown triple backquote feature (on line by itself both before and after). I think this is best for code samples.

Alternatively, for a different format, use the HTML <details> tag but you will likely need to look up how to use it.

@veleno

Please what do you think?

If you stuff this up then you could lock yourself out of your phone. So make sure you know how to recover access before starting on this adventure.