I create a new message to my other email account - call it cloud@whereever..
I attach the pic and SEND
Using the L5 I log in to cloud@whatever and download the pic to L5
In L5 I create a new email, address it to let’s say Trump@prison.ca, and I TRY to attach the pic, but cannot find the pic. I’m blocked from access to the "Pictures folder because no amount of tapping will open the folder.
I haven’t had any time to start the trials of installing Crimson.
Tapping in this has always been a nightmare.
How do I get pictures, downloads, videos, etcetera of folders so I can save them on a reliable device.
Occasionally when I’m feeling masochist, I try and try and when any folder opens, it’s like Christmas (only 70 shopping days left ya know so do your part to help save retailers).
On the Librem 5, install openssh-server with these commands in the terminal:
sudo apt update
sudo apt install openssh-server
Presumably both your Win11 PC and the Librem 5 are connected to the same WiFi network. You need to find the IP address of the Librem 5 with this command: ip a
Under wlan0, you will find the IP address listed after inet. In the following example, the IP address is 172.18.88.42:
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 1a:fa:a0:06:d5:03 brd ff:ff:ff:ff:ff:ff
inet6 fe80::9cd2:2896:9f5e:ead1/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 88:da:1a:7c:d6:5c brd ff:ff:ff:ff:ff:ff
inet 172.18.88.42/24 brd 172.18.88.255 scope global dynamic noprefixroute wlan0
valid_lft 3566sec preferred_lft 3566sec
inet6 fe80::f4c6:d04a:9eb8:aaae/64 scope link noprefixroute
valid_lft forever preferred_lft forever
4: wwan0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/none
inet 10.223.36.59/29 brd 10.223.36.63 scope global noprefixroute wwan0
valid_lft forever preferred_lft forever
Then, open FileZilla on your Win11 PC and set the following fields using the IP address and password of your Librem 5:
Domain: your-ip-address
User: purism
Password: your-Librem5-pin
Port: 21
Then, click on the “Quickconnect” button, and you should be able to browse the files on your Librem 5 and copy them to your PC. Then, you open your email client on your PC and you can attach photos to your emails.
You can also simply open the What IP app to see the IP address (assuming you’re connected to wifi). I believe What IP was one of the original pre-installed apps on amber, and maybe byzantium as well, but if not, it can be installed from the terminal with sudo apt install whatip, or from the PureOS Store app.
For single file transfers perhaps you could look up wormhole or browser-based-variants like “blackhole” (which don’t require an install or an account). Personally, on Android (e.g. your Samsung tablet) I simply use termux with sftp or scp to get things from my Android OS to any other Linux based OS.
I should also point out that your Samsung tablet can almost certainly send/receive e-mails with attachments and your L5 should be able to access that e-mail as well. I’m completely mystified why you’re using Win11 as an intermediary.
[Edit: It’s possible Sharon has blocked me. Her loss.]
You can run an SFTP server as an app on your Samsung tablet and connect to it from L5. See the Primitive FTPd app.
You can either use sshfs to mount remote folders from your tablet, or directly open remote files from GTK-based apps using the GVfs feature. It allows to open paths like sftp://user@host/path in file picker. You just need to properly configure SSH authentication.
If you prefer a GUI method, you can use KDE Connect to transfer a few files between devices. It’s available on Android and Windows so it should be able to pair with your Librem 5.
When you want to attach a file, the easiest way without plugging in extra devices is open the onboard keyboard when it opens the File Chooser dialog, and press the Enter key to dive into the folder. If you want to select multiple files, set keyboard profile to Terminal mode and tap Ctrl before selecting multiple files, then tap Enter to submit the highlighted files.