Multi Function Panel USB (well being and security notices)

Hello everyone,
I’m new here on this Purism Community. I was going to making an introduction post, but I thought why not posting here for Health and Safety Warnings to using multi function USB panel?

Wellbeing and Safety Warnings

Utilization of any PC input gadget or console, including the CH Multi Function Board, might be connected to genuine wounds or scatters. When utilizing the CH Multi Function Panel, as with numerous different exercises, you may encounter incidental agony or uneasiness in your fingers, hands, arms, shoulders, neck, or different parts of your body. Be that as it may, on the off chance that you encounter side effects, for example, tenacious or repeating inconvenience, torment, throbbing, hurting, shivering, deadness, consuming sensation, or firmness, DO NOT IGNORE THESE WARNING SIGNS. STOP Utilize IMMEDIATELY AND SEE A QUALIFIED HEALTH PROFESSIONAL, regardless of the possibility that indications happen while you are not working with the CH Multi Function Panel. Indications like these can be related with excruciating and at times forever impairing wounds or scatters off the nerves, muscles, ligaments, or different parts of the body. These musculoskeletal issue (MSDS) incorporate carpal passage disorder, tendonitis, tenosynovitas, and different conditions. Stifling HAZARD. Since they are little, the keys included with the CH Multi Function Panel exhibit a gagging risk. The keys ought to dependably be kept out of the span of kids.

ELECTRICAL MEDICAL IMPLANTS. The Radio Frequency (RF) innovation utilized in the CH Multi Function Panel may posture wellbeing dangers for individuals with electrical restorative
inserts, for example, PACEMAKERS, HEARING AIDS, AND OTHER MEDICAL Gadgets. Promptly unplug the CH Multi Function Panel in the event that you have reason
to presume that obstruction is occurring. Counsel a doctor or the maker of the medicinal gadget to decide whether it is enough protected from outer RF vitality, or on the off chance that you have any inquiries.

Turn OFF IN HOSPITALS. Take after all controls and standards. Switch the CH Multi Function Panel off close medicinal hardware.
Turn OFF IN AIRCRAFT. The CH Multi Function Panel may cause obstruction in air ship and might be unsafe to the operation of the airplane.
It may not be lawful to utilize the CH Multi Function Panel amid flight.

ELECTRONIC DEVICES. Most present day electronic hardware is protected from Radio Frequency (RF) signals. In any case, certain electronic gear may not
be protected against RF signals radiating from your CH Multi Function Panel.

Windows 2000/XP/Vista/7 Installation Instructions

  1. Need to have Administrator rights to install USB devices in Windows 2000, XP,
    Vista or Windows 7. (an example from https://www.icrfq.com/part/680293-400_602.html )
  2. With the computer booted up fully to the Windows desktop, place the CH Products
    CD ROM into your CD (or DVD) drive, or begin installation if downloaded from the
    CH Products website.
  3. A new screen should appear. Follow the on screen instructions to install the CH
    Control Manager. During the installation of the Control Manager several Found New
    Hardware wizards will appear. This is normal and you must allow them to install
  4. AFTER the Control Manager installation has been completed, plug in the MFP.
  5. Windows will recognize that a USB device has been plugged in and a Found New
    Hardware bubble should appear in the lower right corner of your screen.
  6. Once Windows has finished the automated install, a new bubble should appear in the
    bottom right hand corner and state that your hardware has been installed properly
    and is ready to use.
  7. To check if your MFP has been installed correctly, click on “Start”, “All Programs”,
    “CH Products”, and then left click on the “CH Control Manager” * icon.
  8. Once the Control Manager has opened up, click on the “Test/Calibrate”
  9. A new window will appear allowing you to select the "CH Multi Function Panel” and
    click “OK”.
  10. The Test window will now come up and you will be able to test the buttons on
    your Multi Function Panel.

Have a nice day!