Phone doesn't show bluetooth keyboard as available device to conect

Hardware Librem 5
1

Keyboard itself can connect to other devices.
Phone shows up as pureos on MacbookPro and vice versa.
However bluetooth keyboard does not show up in available bluetooth devices list.

What can I try to get keyboard working with phone?

2

First u need put more vvv about it to prevent a guess response and attract at purism team.

Not sure, but most bt keyboard work on bt-le then the L5 has the LE disabled. At the same time the Firmware and Driver is unbalanced. So my recommend is stop gaming too much with L5, till L5 is good for BT l.e.

1 Like
3

If anything it’s probably being used convergent.

1 Like
4

yes also what info or log can I add?
keyboard has zmk firmware.
and current BT FW is

[   34.413019] redpine_91x: rsi_probe: ***** 9116 Module *****
[   34.413164] redpine_91x: redpine_hal_device_init: oper_mode = 5, coex_mode = 2
[   34.414337] redpine_91x: Received Board Version Number: 10
[   34.418975] redpine_91x: rsi_load_firmware: Loading file RS9116_NLINK_WLAN_BT_IMAGE.rps
[   34.422578] redpine_91x:  FW Length = 329216 bytes
[   34.422612] redpine_91x: ================================================
[   34.422615] redpine_91x: ================ RSI Version Info ==============
[   34.422618] redpine_91x: ================================================
[   34.422622] redpine_91x: FW Version	: 2.1.0.0
[   34.422627] redpine_91x: RSI FW Version	:  1610.2.1.ab.ffbf
[   34.422633] redpine_91x: Driver Version	: RS9116.NB0.NL.GNU.LNX.OSD.2.0.0.0024
[   34.422638] redpine_91x: Operating mode	: 5 [Wi-Fi STA + BT EDR]
[   34.422642] redpine_91x: Firmware file	: RS9116_NLINK_WLAN_BT_IMAGE.rps
[   34.422646] redpine_91x: ================================================
[   34.630541] redpine_91x:  *** Flash CRC passed ***
[   34.647646] redpine_91x: ***** Loaded Firmware *****
[   39.907650] redpine_91x: ================================================
[   39.907679] redpine_91x: ================ RSI Version Info ==============
[   39.907682] redpine_91x: ================================================
[   39.907686] redpine_91x: FW Version	: 1.2.0.16
[   39.907694] redpine_91x: RSI FW Version	:  1610.1.2.ab.ffbf
[   39.907701] redpine_91x: Driver Version	: RS9116.NB0.NL.GNU.LNX.OSD.2.0.0.0024
[   39.907705] redpine_91x: Operating mode	: 5 [Wi-Fi STA + BT EDR]
[   39.907710] redpine_91x: Firmware file	: RS9116_NLINK_WLAN_BT_IMAGE.rps
[   39.907714] redpine_91x: ================================================
[   39.919612] redpine_91x: rsi_send_bt_reg_params: Sending BT reg frame
[   39.920080] redpine_91x:  HCI module init done...
[   39.927702] redpine_91x: RSI HCI DEVICE "hci0" open
[   40.009906] redpine_91x: <==== Interface UP ====>
[   40.013600] redpine_91x: rsi_mac80211_bss_info_changed: Change of ERP INFO: 0
[   40.013626] redpine_91x: rsi_mac80211_bss_info_changed: Sending vap updates....
[   40.035978] redpine_91x: <==== Interface DOWN ====>
[   40.039644] redpine_91x: <==== Interface UP ====>
[   40.039706] redpine_91x: rsi_mac80211_bss_info_changed: Change of ERP INFO: 0
[   40.039713] redpine_91x: rsi_mac80211_bss_info_changed: Sending vap updates....
[   43.995603] redpine_91x: <==== Interface DOWN ====>
[   44.000538] redpine_91x: <==== Interface UP ====>
[   44.000602] redpine_91x: rsi_mac80211_bss_info_changed: Change of ERP INFO: 0
[   44.000610] redpine_91x: rsi_mac80211_bss_info_changed: Sending vap updates....
[   47.817372] redpine_91x: EAPOL 4 confirm
1 Like
5

Someone posted instructions to set up the PineTime watch, and the first step was setting up the Bluetooth LE. Maybe if you follow that first step you can get it to work:

3 Likes
6

Thank you very much, enabling BLE worked to detect and connect keyboard.