Thank you so much for SSD performance upgrade!!!
1 Like
Also, i got strange problem with volume control after update. FN+Arrows skips every second click. This commands tell that system see every second click.
evtest /dev/input/event6
xinput test 11
Problem appears in Fedora 32 and Debian live USB too. Downgrade to 4.11 don’t solve problem. Volume buttons on external keyboard works fine.
keyboard/volume control is purely a function of the EC (and coreboot ACPI), but nothing has changed there since the initial port back in 2017
=((((((((((((((((( But how to fix it?
Was able to update my L13v2 with no issues. Works great. Thanks!
1 Like
Also, i got strange problem with volume control after update. FN+Arrows skips every second click. This commands tell that system see every second click.
I have the same behavior, though I don’t know if this was the case before the update, as I’ve never used the volume buttons on my Librem 15v4 before the update. I do not see the same behavior for brightness control. Evtest only reports every second button press and so does PureOS.
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x0 product 0x0 version 0x0
Input device name: "Topstar Laptop extra buttons"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 113 (KEY_MUTE)
Event code 114 (KEY_VOLUMEDOWN)
Event code 115 (KEY_VOLUMEUP)
Event code 150 (KEY_WWW)
Event code 155 (KEY_MAIL)
Event code 183 (KEY_F13)
Event code 184 (KEY_F14)
Event code 224 (KEY_BRIGHTNESSDOWN)
Event code 225 (KEY_BRIGHTNESSUP)
Event code 226 (KEY_MEDIA)
Event code 227 (KEY_SWITCHVIDEOMODE)
Event code 238 (KEY_WLAN)
Event code 240 (KEY_UNKNOWN)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)
Event: time 1595525402.487586, type 4 (EV_MSC), code 4 (MSC_SCAN), value 83
Event: time 1595525402.487586, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1
Event: time 1595525402.487586, -------------- SYN_REPORT ------------
Event: time 1595525402.487634, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0
Event: time 1595525402.487634, -------------- SYN_REPORT ------------
Event: time 1595525403.325514, type 4 (EV_MSC), code 4 (MSC_SCAN), value 84
Event: time 1595525403.325514, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 1
Event: time 1595525403.325514, -------------- SYN_REPORT ------------
Event: time 1595525403.325560, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 0
Event: time 1595525403.325560, -------------- SYN_REPORT ------------
Event: time 1595525404.961990, type 4 (EV_MSC), code 4 (MSC_SCAN), value 83
Event: time 1595525404.961990, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1
Event: time 1595525404.961990, -------------- SYN_REPORT ------------
Event: time 1595525404.962039, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0
Event: time 1595525404.962039, -------------- SYN_REPORT ------------
Event: time 1595525405.680293, type 4 (EV_MSC), code 4 (MSC_SCAN), value 84
Event: time 1595525405.680293, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 1
Event: time 1595525405.680293, -------------- SYN_REPORT ------------
Event: time 1595525405.680334, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 0
Event: time 1595525405.680334, -------------- SYN_REPORT ------------
The mute key (which in the same list above) does not have the same behavior. It works every time it is pressed.
2 Likes
How do I downgrade to the previous version of Coreboot?
(This 4.12 version messed up the ACPI interface with one of my disks. It loads as expected with Linux, but will no longer work with BSD, which complains about misconfigured ACPI for it. Since this error started immediately after upgrading Coreboot, I want to try downgrading.)
you simply run an older version of the coreboot utility script
can you elaborate on the error, so perhaps we can fix it? I’m not aware of any ACPI changes around any disks.
can you explain what in that log is problematic? I’m not seeing any errors related to your disk drive(s).
Also, is there an easy way for me to reproduce the issue with an OpenBSD USB? I’m not familiar with it at all.
I think it would be best if you provided me with a link to the previous Coreboot installer, so I can report back whether or not downgrading fixes the issue. I can also post a dmesg for that version so we can be sure of what is different.
This dmesg does not show the specific errors mounting sd0 since I disabled it in fstab—otherwise, I would not even be able to boot past the error.
I am not an expert user, so I don’t think I can provide much more helpful information than I already have. But if I can try rolling back to the previous version, that would tell us if Coreboot is actually at fault.
just download and run the script from here:
Thank you. I found that I had the same problem with my SSD drive under 4.11, so at this point I am going to assume that the problem is not with the Coreboot update, but some kind of user error on my part.
well ruling out firmware should make it easier to track down the source of the problem 
Also, downgrade to coreboot 4.11 don’t solve my problem with volume buttons too. But it appear just after update.
Because i use Fedora, i downloaded coreboot image from script and flash it using flashrom utility from Fedora repository. Can it cause problems?
sudo flashrom -p internal:laptop=force_I_want_a_brick,ich_spi_mode=hwseq -w coreboot-librem_15v3-4.12-Purism-2.rom
why would you have to flash manually just because you use Fedora?
only problem will be loss of serial # and default bootorder.
Because i can’t do flash step, but really want Sata speed upgrade.
Injecting bootorder into coreboot image
Do you want to flash the coreboot update now (y/N) ? y
Checking for usable version of flashrom
which: no build-essential in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
which: no libpci-dev in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
which: no libudev-dev in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
which: no zlib1g-dev in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
which: no apt in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
The following dependencies are needed for this script: build-essential libpci-dev libudev-dev zlib1g-dev
Please install all required dependencies are installed and re-run this script
Fedora repositories does not contain this packages.
Also, my serial number was saved after manual update.
I notice something strange. This step was failed, but my system has flashrom package installed.
Checking for usable version of flashrom
$ whereis flashrom
flashrom: /usr/sbin/flashrom /usr/share/man/man8/flashrom.8.gz
what are the equivalents? I’ll adjust the script accordingly
you now need flashrom 1.2, so that’s what it checks for.
It’s flashrom 1.2.
$ flashrom --versoin
flashrom v1.2 on Linux 5.7.10-201.fc32.x86_64 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
flashrom: unrecognized option '--versoin'
Please run "flashrom --help" for usage info.
Fedora have some similar packages, also, lol, it has apt.
[scaled@librem-15 ~]$ LANG=C.UTF-8 dnf search libpci
Last metadata expiration check: 5:11:04 ago on Sun Jul 26 23:15:54 2020.
============================= Name Matched: libpci =============================
libpciaccess.x86_64 : PCI access library
libpciaccess.i686 : PCI access library
libpciaccess-devel.x86_64 : PCI access library development package
libpciaccess-devel.i686 : PCI access library development package
[scaled@librem-15 ~]$ LANG=C.UTF-8 dnf search libudev
Last metadata expiration check: 5:11:16 ago on Sun Jul 26 23:15:54 2020.
=========================== Summary Matched: libudev ===========================
libgudev.x86_64 : GObject-based wrapper library for libudev
libgudev.i686 : GObject-based wrapper library for libudev
python3-pyudev.noarch : A libudev binding
[scaled@librem-15 ~]$ LANG=C.UTF-8 dnf search zlib1g
Last metadata expiration check: 5:11:27 ago on Sun Jul 26 23:15:54 2020.
No matches found.
[scaled@librem-15 ~]$ LANG=C.UTF-8 dnf search apt
Last metadata expiration check: 5:11:56 ago on Sun Jul 26 23:15:54 2020.
========================== Name Exactly Matched: apt ===========================
apt.x86_64 : Command-line package manager for Debian packages
========================= Name & Summary Matched: apt ==========================
...
flashrom -R prints the version, what does it report?