Librem 5 firmware updates

Hardware Librem 5
9

Can’t tell at this point. It should be upgradeable, but we’ll see how that goes in practice.

amber hasn’t been supported for a while. Please upgrade!

2 Likes
10

Can we migrate to Crimson early?

1 Like
11

dos answered that a few times, have a look at his post history.

2 Likes
12

As far as I know, including those mentioned, there are a total of 6 (2 are combined):

  1. DAS U-Boot
  2. TTXS (Smartcard Reader)
  3. USB PD Controller
  4. Firmware Jail (also includes Redpine RS9116 firmware)
  5. BM818-x1

The first four on this list can be performed sequentially directly during and after reflashing the Librem 5. The last two are performed on the Librem 5 itself.

3 Likes
13

Smartcard firmware flashing is performed on the Librem 5 as well.

In fact, all of them can be performed on the Librem 5. Some can also be done from a host computer using uuu and flashing mode.

There’s also touchscreen controller (FT8006P) and GPS module (Teseo-LIV3F) with upgradable firmwares. I’m not aware of anything else.

That’s a bad link (personal fork), and Redpine firmware is included in the firmware jail these days.

4 Likes
15

Thank you for the new information. I performed most of my firmware updates using a PureOS live USB since most firmware update instructions usually involve it in some way or another. I cannot remove Redpine from the list due to my trust level, but I will do it once it has been elevated.

I have not seen the touchscreen and GPS firmware repos, but I will take a look and gather some more information.

16

There’s no GPS firmware repo, but you can find it on STM website. There were no updates available since the very first Librem 5s were built though, so there’s nothing to see there - all phones in existence have the latest firmware.

I have asked internally about public availability of touchscreen firmware. There was one change early on that disabled filtering at the screen edges, which was too strong and pretty annoying. You can check the version with:

sudo cat /sys/kernel/debug/edt_ft5x06/lic_version /sys/kernel/debug/edt_ft5x06/fw_version

If it’s either:

7
2

or

2
3

you have the latest one. The command has to be executed while the screen is on, otherwise it will return garbage.

3 Likes
17

Thank you for the instructions, the output I received was:

7
2

Are the other values for a different touchscreen controller then?

18

Yes, there are two panel versions with different versioning.

1 Like
19

Hello Everybody

I personal have my thoughts about what i am reading about firmware updates here
I find it a bit strange that we all have to hunt or ask separatly for support for better firmware for a device which has known problems with software and firmware
I understand perfectly that this device and the software is still in heavy development but if there is better firmware it should be provided by Purism in updates for all of us
yust my believe

Best regards for all

3 Likes
20

Is this still accurate? As in, do the scripts still work? I ask because I tried flashing the USB PD Controller update and the script was not working for me.

I think upgrading the firmware may help with ongoing suspend issues I am having…

2 Likes
21

The scripts should still work. There are build dependencies which are not mentioned at all during the procedure, but they are shared with reflashing the Librem 5.

1 Like
22

Where might I find the build dependencies?

1 Like
23

As mentioned earlier, they are shared with reflashing the Librem 5:

You may also need to install udev rules from the same instructions.

2 Likes
24

How does one test their phone to see if any firmware would need updating/grading?

3 Likes
25

Usually there is a command or application that determines the firmware version for the hardware it is tied to. For example, bm818-tools displays information about the Broadmobi BM818-x1 cellular modem.

26

I think that’s the point of

sudo apt build-dep .

from the official reflash procedure. That should work on an ongoing basis whereas hard-coding a list of packages, even a currently correct list, is inviting future problems if the dependencies change.

2 Likes
27

I don’t think there is any easy way to do this - given the lack of comprehensive documentation.

However for uboot specifically the following post covers it: Manual Updates for Librem5 - #4 by Cc281080 but then, as dos says, uboot is the one piece that does actually get updated on reflash (so it is very likely that your phone already has the latest uboot).

2 Likes
28

Well, I tried that but I will try again. Thank you.

2 Likes
29

And to be fair, that will only work if the software creator correctly “documents” internally what the dependencies are.

2 Likes