Librem5 silicone cover

could you please provide a silicon cover with the phone for the backers?
ofcourse is not possible to found it elsewhere, and i’d like to protect the phone


Yes please, I doubt that there will be abundance of accessories (but I’ll be more than happy to be wrong), so a cover could be a vital accessory for this precious phone!


any hope on this?

/20 char limits

maybe releasing a 3d model of the phone case will allow to create a cover with a 3d printer? is someone around experienced with such a task?


There are some nice 3d printing materials like TPU which would fit perfect. If Purism did not ship a cover I guess some CAD skills from the community would show up. I can do a functional one but I suck at design :slight_smile:


I asked in an email and as I recall, I was more or less told they’d be relying on 3rd parties to hopefully produce something. Depending on final dimensions, something like this could be an option:

“Universal plastic frame/holster for phones. Minimum to maximum phone dimensions: 5.6” x 2.64" x 0.27" to 5.95" x 3.12" x 0.43" only."


i’m bumping this to know if there is any chance to have it from purism

1 Like

If librem 5 had a small elevation in the corners, thus preventing the glass being subject to direct impact every time it sliped from our hands, that would solve most cases of breaking glass, and would make a silicon cover less mandatory…


This is the exact type of case I always look for, too. I love the Spigen ToughArmor for my phones due to that. I can set my current phone face down and not worry about it due to the raised edge around the screen.

To be honest, I am not surprised that Purism will not likely take time to develop a case (they have enough to do), and I doubt there will be any case manufacturers that design a case specific to the Gen 1 Librem 5.
As suggested by @maxzor in a previous post, I plan on designing a case for our beloved 5 as soon as Purism finalizes the case dimensions and port/button/switch placements. For myself, I plan on doing a design that is a combination of an inner TPU flexible shell (with a slight lip overlapping the top of the phone) perhaps combined with an outer hard shell, likely done in PLA. I will be more than happy to take suggestions during the design phase, and of course it goes without saying that any design will be distributed under a fair attribution CC license. :slight_smile:
For those without a printer, the design will still be useful as you can simply get the case printed through a company such as In fact, if there is enough interest, I could always set up an account with them once the design is complete and tested so you could simply purchase it directly without having to upload the file etc. (and maybe I would even make a few dollars off the design!)
No doubt we are many months away from having enough case details to start design, but rest assured there will be a Librem 5 case!


i don’t think this will be too much time eating (even dollars eating) if they have a printer i think the cost should be around 1$ to make it, you can buy these silicon cover for 3$ usually and they make money selling it at 3$
i don’t like the idea to spendo 10-20-30$ to buy the cover and the shipping cost just for a cover, the phone is expensive but i pay for freedom and to endorse a company who care about it, but i do not have money to waste for covers, i’m ok if they are gonna sell it for less than 5$ because is just +5$ and it ship with the phone so no other costs, if they really can’t do it for free considering the phone price

It’s been some time now, do you think you made any headway with your case design and shapeway suggestions?

No designs yet, as I’m still waiting to get final dimensions of the hardware before I commit some time to designing a case. Rest assured I still plan to make something and am still pondering designs that are functional but still easily printable. I will certainly start sharing designs with the community once I start and hopefully together we can crowd source a cool design that people will be happy with.

@roguenorm, @Seven, I kind of jumped the gun and started on a cover using approximate measurements from the images on the website. I’m using OpenSCAD, so it will be relatively easy to fix the dimensions when we have them. Once I’ve got the script cleaned up a little more, I’ll put it on Github, and we could start refining/branching designs, etc.


That’s awesome and a great idea! That will speed up design immensely, since it looks like a great base.

And nice curves! (I don’t say that to just anyone :slight_smile: ) Are you using a Hull or a Minkowski approach for your rounded corners?

Also, if you are on Matrix, you should mention it in the in the room.


Thanks to L5 depth I still think that all it is needed for sufficient protection is to have integrated D3O® material for impact absorption within TPU shell for impact protection and grip … thinking back cover here is obsolete and purposely to be avoided.
Similarly, GARMIN offers Silicone Cases (without back cover) for Edge® Explore and Edge® 1030 in black, white, yellow, green, blue and red. Yes, please help if You can, even though as my playground (choice of material and design) looks different it still might be the proper choice of manufacturer or broader interest.

And, for example, if we talk about 3D Printing with Silicones, ACEO Open Print Lab (in Burghausen, DEU and Ann Abor, Michigan, USA) provide their service only to B2B customers and this means that I as individual cannot buy there even if I have design template (or two).


The script makes liberal use of the “hull” function – although I generally get what “minkowski” does, I find “hull” more intuitive and flexible, if not more efficient in terms of code length.

I’m not on Matrix, but will look that up.

Script coming soon!

1 Like

Regarding a cover/case it would be cool to have two slits in the back if the back ever gets added back to run an armband through to use for running, working out, etc.

I’ve got the script up on Github
I hope it’s fairly self explanitory, but please let me know if anyone needs explanation of any of the user-set parameters. I’ve grouped all of the settable parameters at the top of the script. When we have the final phone dimensions with the locations of the controls, we should just be able to plug them in.
Anyone unfamiliar with OpenSCAD that is interested can download it from
I may start a new thread to broaden the exposure.


@snarfel, my cover is not backless. Although with an aluminum cover you don’t really need a back, I prefer to have something to protect the aluminum cover from scratches/dents, even if it increases the overall thickness. It should therefore be fairly straightforward to add two slits to the back of this design. Maybe start a new branch from my github main branch? Let me know if you need help.